Winter is almost here, and with it comes some decreases in temperature. The winter months do not just call for turning up the heat and pulling out your winter clothing.
Many industries do not have a choice expect to shift their gears due to the cooler and colder temperatures. For instance, any industry that utilizes hydraulic hoses will need to take extra measures and precautions during this season to ensure all hydraulic hoses remain in perfect working condition.
It is important that your equipment be prepared for the colder months to avoid any threat of damage due to the dips in temperatures. Under colder conditions, hydraulic hoses can quickly become stiff and lose their flexibility.
How Can The Temperature Impact Hydraulic Hoses?
The colder weather, snow, and high winds that we experience in Minnesota adversaries for commercial hoses. When hydraulic hoses are exposed to cold weather, especially when it is for an extended period of time, can be permanently altered. If the hydraulic hoses are exposed to cold temperatures, the hydraulic hoses can become stiff after the temperatures begin to increase.
Although there are a significant number of hoses on the market today that have been designed to withstand colder temperatures, it is always a wise choice to take the safe route. When you take all the necessary steps to care for your hoses during the winter and the weather-related conditions that normally arise during this season, you can significantly extend the lifespan of your hydraulic hoses. You can also prevent any minor or major problems down the line.
What Can I Do To Protect My Hydraulic Hoses?
It does not matter if the temperatures are 5 degrees below freezing or if the temperatures are in the negatives, your hydraulic hoses should always have the protection they need during the winter. Your hoses should always be protected from the cold weather. You need high-quality hoses to make your equipment work the way they were intended.
When you install your hydraulic hoses, you are relying on the hoses to remain intact and not suffer any damages during the course of uses. However, this will only happen if you properly care for your hoses. During the cold months, you can protect your commercial hoses by properly wrapping them and keeping the cold air, snow, ice, etc. away.
You can also protect your hydraulic hoses by storing them in a clean environment. To ensure your hydraulic hoses operate at their highest capacity, you should allow your hoses and any attachments time to get going before operating them.
When you perform consistent inspections and follow the recommended guidelines according to the manufacturer’s manual, you can keep your hydraulic hoses safe during these months. If you notice any problems with your hydraulic hoses, you should definitely not delay in having these problems addressed.
Rubber blends in typical hydraulic hoses are approved for low temperatures, depending on the degrees. However, there are several manufacturers that will offer a variety of products that are acceptable for significantly low temperatures.
You will need to have your hydraulic hoses replaced to avoid further damage, and to avoid accidents and injuries. Winterizing your hydraulic hoses and other equipment can be a major task, especially if you are not sure what steps you should take and if you do not have the proper resources.
Contact Custom Hose Tech today if you are looking for durable hydraulic hoses and fittings that will help your equipment make it through the colder months. We are a small local company, but we are the leading hydraulic hose and fittings specialists in the Twin Cities. We know what it takes to winterize hydraulic hoses, as well as remove and replace any damaged hose or fitting.